 |
 MICROWAVE HIGH VOLTAGE CAPACITOR 0CZZW1H004C $29.99 Time Remaining: 28d 14h 36m Buy It Now for only: $29.99 |
 microwave oven capacitor 2006 $10.96 Time Remaining: 25d 10h 56m Buy It Now for only: $10.96 |
 microwave oven capacitor 2003 $10.96 Time Remaining: 25d 11h 7m Buy It Now for only: $10.96 |
Microwave Capacitor
Electronic Article Surveillance (EAS) Systems in India
Electronic Article Surveillance (EAS) is a technology used to identify items as they pass through a gated area. Typically this identification is used to alert someone of the unauthorized removal of items from a store, library, or data center.
There are several types of EAS systems. In each case, the EAS tag or label is affixed to an item. The tag is then deactivated when the item is purchased (or legally borrowed) at the checkout desk. When the item is moved through the gates (usually at a door to the premises), the gate is able to sense if the tag is active or deactivated and sound an alarm if necessary.
EAS systems are used anywhere there is a chance of theft from small items to large. By placing an EAS tag on an item, it is not necessary to hide the item behind locked doors and so makes it easier for the consumer to review the product.
Today's EAS source tagging, where the tag is built into the product at the point of manufacture or packaging, has become commonplace. This makes the labeling of goods unnecessary, saving time and money at the store.
How EAS Systems works.
EAS systems operate from a simple principle regardless of the manufacturer or the specific type of technology used: a transmitter sends a signal at defined frequencies to a receiver. This creates a surveillance area, usually at a checkout aisle or an exit in the case of retail stores. Upon entering the area, a tag or label with special characteristics creates a disturbance, which is detected by the receiver. The exact means by which the tag or label disrupts the signal is a distinctive part of different EAS systems. For example, tags or labels may alter the signal by using a simple semi-conductor junction (the basic building block of an integrated circuit), a tuned circuit composed of an inductor and capacitor, soft magnetic strips or wires, or vibrating resonators.
By design the disturbed signal created by the tag and detected by the receiver is distinctive and not likely to be created by natural circumstances. The tag is the key element, for it must create a unique signal to avoid false alarms. The disturbance in the electronic environment caused by a tag or label creates an alarm condition that usually indicate someone is shoplifting or removing a protected item from the area.The nature of the technology dictates how wide the exit/entrance aisle may be. Systems are available that cover from a narrow aisle up to a wide mall store opening. Similarly, the type of technology affects the ease of shielding (blocking or detuning the signal), the visibility and size of the tag, the rate of false alarms, the percentage of detection rate (pick rate), and cost.The physics of a particular EAS tag and resultant EAS technology determines which frequency range is used to create the surveillance area. EAS systems range from very low frequencies through the radio frequency range. Similarly, these different frequencies play a key role in establishing the features that affect operation.
How Acousto-Magnetic Technology Works
Acousto-magnetic EAS systems use a transmitter to create a surveillance area where tags and labels are detected. The transmitter sends a radio frequency signal at a frequency of 58 kHz (thousands of cycles per second), but the frequency is sent in pulses. The transmit signal energizes a tag in the surveillance zone. When the transmit signal pulse ends, the tag responds, emitting a single frequency signal like a tuning fork. The tag signal is at about the same frequency as the transmitter signal.
While the transmitter is off between pulses, the tag signal is detected by a receiver. A microcomputer checks the tag signal detected by the receiver to ensure it is at the right frequency, occurs in time synchronized to the transmitter, at the proper level, and at the correct repetition rate. If the criteria is met, an alarm occurs.
How Electromagnetic Technology Works
The electromagnetic EAS system creates a low frequency electromagnetic field (fundamental frequencies between 70 Hz and 1 kHz are typically used) between two pedestals at an exit or checkout aisle. The field continuously varies in strength and polarity, repeating a cycle from positive to negative and back to positive again. With each half cycle, the polarity of the magnetic field between the pedestals changes.
In response to the changing magnetic field created by the transmitter, the magnetic field domain of the tag material abruptly "switches" as the field strength varies past a particular point, whether positive or negative, during each half of the transmit cycle. This abrupt change in the magnetic state of tag material generates a momentary signal that is rich in harmonics (multiples) of the fundamental frequency. Using electronic signal processing techniques, the system identifies that the harmonics are at the right frequencies and levels, and that they occur at the proper time in relation to the transmitter signal. If the criteria are met an alarm occurs.
How Swept-RF Works
Like other EAS technologies, swept-rf uses a transmitter to create a surveillance area where tags and labels are detected. The transmitter sends a signal that varies between 7.4 and 8.8 MHz (millions of cycles per second), which is why it is called swept; it sweeps over a range of frequencies.
The transmitter signal energizes the swept-rf tag or label, which is composed of a circuit containing a capacitor and an inductor or coil, both of which store electrical energy. When connected together in a loop, the components can pass energy back and forth or "resonate." The frequency at which the circuit resonates is controlled by matching the storage capacity of the coil and capacitor. The tag responds by emitting a signal that is detected by a receiver.
In addition to the small tag signal, the receiver also responds to the much larger transmitter signal. By detecting a phase difference between these two signals, and other properties of the tag signal, the receiver recognizes the presence of a tag and generates an alarm.
How Microwave Technology Works
The system is composed of a transmitter, a synchronous receiver, a microprocessor-controlled detector, and an alarm. The transmitter produces two signals to excite the tag. One is a high frequency carrier signal and the other is a much lower frequency electrostatic signal. In North America the high frequency signal is hopped over a band of 902-906 MHz in distinct groups of 50 frequencies to avoid interference from adjacent systems. In Europe the high frequency is between 2402 and 2486 MHz and is not hopped; each system has its own unique frequency assigned.
The lower frequency is modulation signal is 111.5 kHz. It is a non propagating electrostatic signal that limits the range of the high frequency RF field to the desired surveillance zone. This prevents the signals from traveling large distances and interfering with other systems or causing alarms due to tags on articles just outside the surveillance zone.
The tag is composed of a microwave diode and a combination antenna for the receipt of the high and low frequency. When introduced into the field of the transmitter, the tag combines or mixes the two fields and re-radiates the combined signal to the high frequency receiver. The resultant 111.5 kHz modulation of the high frequency signal is amplified and compared to a reference in the detector to ensure it is at the correct frequency and level. If correct, an alarm is initiated.
About the Author
Gulshan Mawah.
Business Devlopment Manager.
Indian Barcode Corporation ( A unit of Mindware).
How much energy do you think i could get out of this?
A tub with the dimensions 15x5x5, with one 15x5 wall made of Iron and one 15x5 wall made of copper, filled with 90%water and 10% electrolyte.
The 5x5 walls are non-conductive. And I hook up each conductive wall to a wire and plug it into a voltmeter.
What radioactive isotopes other than Uranium and Plutonium can be used to generate electricity. Enough electricity let's say to power a 115v AC 1.0Amp TV. Don't care about power conversions if it has to be in DC, just is there a radioactive isotope that can generate enough power to power ANY household appliance.
Where can I find more information on magnetrons and the principles on which the whole system works.
Is there anyway to harness the energy left in a microwaves capacitors to power something, or will it dump it all immediately upon any request for power.
Not much before the wall of your battery is eaten through. About 4 years ago I read an article in Scientific American (I think it was) about an element that could be made to shed alpha particles just by bombarding it with x-rays. 10 times as much energy was released as was needed to run the x-ray machine. The element had a 35 year half life. Nuclear batteries are used in pacemakers and last quite a few years- lifetime guarantee I've heard. They were also used to power satellites and an early Mars rover too.
Most capacitors in electrical devices only work for a few seconds, tops to give an extra boost when turning on equipment.
Is It A Good Idea To Microwave Capacitors & Voltage Meters?